Price: $83.99
Product Description
Chamfering Machine can Pour Shapes
1. The maximum processing C Angle of this equipment is C0.1-1.5
2. Angle R is the arc Angle of R1.5
Procedure for replacing a Blade
1. Loosen the two screws of the black gear plate
Remove two screws stuck to the baffle plate using the matching wrench
2. Unscrew the gear plate (as shown in the picture)
Remove baffle counterclockwise
3. Loosen the blade screws
Remove the blade screws using a quad wrench and replace the blade and tighten the screws.
Usage and maintenance tips
1. Before using the new machine, please inject pneumatic tool oil and inject about 4C.C into the air inlet. After continuous use for about 3 hours, about 4C.C is also injected into the air inlet.
2. After injecting pneumatic tool oil, let the machine idling for about ten seconds (do not operate), and let the internal parts of the grinder be lubricated as a whole before proceeding.
3. It is an air compressor (air pump) for mechanical use. The output of the air compressor is about 6~8kg. Generally, most of the compressed gas of a traditional air compressor contains water, and the piston of the air compressor brings out a small part of the lubricating oil. If the oil-water separator is not used, water and oil and gas will enter the inside of the machine for a long time. The occurrence of adhesion slows down the rotation of the machine, resulting in insufficient speed and torque. In this way, the pneumatic tool oil needs to be input into the air inlet, and the machine can be used normally after idling for about ten seconds.
Mini chamfering machine set
This chamfering machine kit includes additional replacement bearings and blades to make it more convenient when you need to replace bladesThe machine in the kit is fitted with two blades and a bearing, plus six replacement blades plus four bearingsBuying the Mini chamfering machine set can save time and cost more than buying blades individually
【Adjustable Speed and Angle】: The portable deburring trimming chamfering tool air grinder 1-5 block valve adjustment thickened knob, freely adjust the gear speed you need. The chamfer size can be adjusted at will. The safety switch is used to prevent accidental touch to protect the user’s safety at all times. 1/4 inch metal filter, free speed: 30000 RPM, air consumption 0.4/min.
【Stable Speed】: Pneumatic metal beveling tool can withstand high impact and high speed. The speed is increased and the chamfer is smoother, and the beveling machine is more durable.
【Higher Efficiency】: The upgraded version of the pneumatic chamfer tool, the new design adopts a new chrome-plated all-aluminum shell with high-quality bearings, and is equipped with high-precision heat-treated blades for better use and smoother deburring and chamfering.
【Application】:JIUNENG’s air beveler grinder adopts the thinnest nut lock bearing at present, which can chamfer in the narrowest and shallowest space, and is suitable for various angles, such as straight edge chamfering, inner and outer round hole chamfering, and irregular chamfering for metal trimming and round R side.
Price: $83.99
