Price: $19.99
“Ethernet to OBD2 Interface Features:
For BMW Ethernet to OBD Cable used for coding, programming & diagnostics via E-SYS, INPA, ISTA, ISIS, etc. Software.
It is essential if you wish to flash your BMW with the Bootmod3 Tuning Platform and is for all BMW F series cars, the new 1 Series, 3 Series, 5 Series, 7 Series , GT, X3.
RJ45 Enthernet Connector Cable fitment:(All for BMW F-series cars)
1-series: F20, F21, F44, F45, F46
2-series: F22, F23
3-series: F30, F31, F34, F80
4-series: F32, F33, F35, F36, F82, F83
5-series: F07, F10, F11, F18
6-series: F06, F12, F13
7-series: F01, F02, F03, F04
i-series: i3 (I01), i8 (I12)
X-series: F15, F16, F25, F26, F48
Mini Hatch/Hardtop/5-Door Coupe: F55, F56
Rolls-Royce: RR01, RR02, RR03, RR04, RR05
Practical Coding Features of Enet Cable:
1. Lock unlock sound confirmation ( to prevent radio interference, add sound to confirm car locked when turn light confirmation inconvenient. This is setup in cic) 2. Can operate the mory address to 50 3. Display engine output and torque meter ( purely fun, look engine output ) 4. Cancel confirmation screen big screen boot delay 5. Open the voice recognition function 6. Three kind of Bluetooth phone ringtones ( personaly only ) 7. Increasing the cic memory address to 50 8. The glass automatically rise to the top process is not terminated by the car door ( easy to get off to close the window waiting ) 9. The digital speed display ( fun only ) 10. Air-conditioned memory of the last off state ( without air conditioning season is more convenient ) 11. Indoor cycling memories of the last time the state when engine off 12. A-pillar electric tailgate buttons and remote control a key to close the power tailgate. At any time terminate the reverse operation ( turn off 15 minutes or more reset ) 13. Increasing shift paddles 14. The small screen to the large-screen display modify 15. Pdc display vertical and horizontal 16. Disable the seat belt status display – passenger seat 17. Disable the seat belt status display – driver seat 18. Disable seat belt reminder mistake ! The link is invalid. Device – passenger seat 19. Disable seat belt reminder – driving position 20. Disabled unfasten their seat belts voice prompts – passenger seat 21. Disabled unfasten their seat belts voice prompts – driving position 22. Intersection vehicle high beam automatic control ( no condition tested. Do not know if it is valid ) etc … hundreds of options”
2.Ethernet RJ45 Cable Support: BMW F-series, the new 1 Series, 3 Series, 5 Series, 7 Series, GT, X3 and the latest BMW G-Series, brush hidden upscale programming line.
3.The Ethernet to OBD (ENET) cable is required to connect your laptop to your vehicle when tuning with bootmod3. With this cable and a diagnostic tool, you can choose to program a single module or hide multiple modules. This all works through the ENET data line and the E-SYS ICOM coding. Note: If your laptop doesn’t have an Ethernet port or you are looking at using an iOS or Android device for Coding with Bimmercode,a Lightning (iOS), USB-C (Android) to RJ45 Adapter is required
4.Strong Signal Transmission:This interface cable can shield interference and has strong signal transmission strength. The cable length is 2 meters/ 6.5ft.
5.Main benefits of this BMW enet cable: Diagnose issues via OBDII by reading the DTC codes from your BMW. Code additional features into your BMW or change factory coding
Price: $19.99
