Price: $49.00
Step 1:
- Prepare the floor with the Concrete DNA Diamond Pad with Resins (ASIN: B06XXC1VVV). This is the 30 grit prep pad.
- Run the pad with plenty of water under a low speed floor buffer with our Super Blue product diluted at a minimum of 9 parts water. (ASIN: B01H7KGEUA)
- Squeegee the water and remove from the floor with a wet/dry squeegee vac
- Ensure the floor is clean from dust and footprints. Let the floor dry completely
Step 2:
- Spray the floor with the stain and ensure 100% coverage.
- Let the stain dry on the floor. When it is dry the stain is done reacting.
- Thoroughly flush the residue from the stain off the floor with water and clean the floor free from dust. Tip: If you run your finger over the floor and your finger picks up residue continue flushing until residue is gone
- Let the floor dry completely overnight
Step 3:
- Apply Ez Seal (ASIN: B01H7L8G3M) with a 3/8” nap roller
- Apply at least 2 thin coats
Step 4:
- Allow Ez Seal to dry for at least 12 hours before applying Ez-Glo (ASIN: B01H7MJ8JM)
- Apply at least 1 coat of Ez-Glo by using a microfiber mop
Chemical Reaction so the stain is permanent.
Professional grade product that anyone can use.
UV Stable – great for interior and/or exterior applications.
Detailed System Instructions Below and sent with every package
Price: $49.00
