Price: $3.80
Product Description
Breathe New Life Into Your Old, Dented and Rusted Baseboard Heaters With Our Simple, Easy-to-Install Baseboarders Basic Steel Covers
Amazingly Durable
Each Baseboarders Basic panel and accessory is made of hiqh quality steel, is professionally powder-coated and will not rust.
Designed with Safety In Mind
Single piece panel construction ensures proper airflow around the heating element while prohibiting direct access to it, making it safer for children and pets.
Easy Slip-on Installation
Installation is an easy DIY project, requiring no tools or hired help. Simply remove the existing baseboard heater endcaps and front cover panel, snap your new Baseboarders Endcaps onto your Baseboarders panel, position the Baseboarders assembly onto the original back plate & push down firmly into place, that’s it — you’re done!
Baseboarders Basic Provides a Clean and Minimalistic Aesthetic — the Most Cost-Effective Option
Baseboarders Basic…Designed for Form and Function 3′, 4′, 5′ & 6′ standard panel lengths (note: panels can be cut to custom lengths with tin snips) Made with high quality rust resistant galvanized steel Powder coated semi-gloss white finish
The Basic Series is the most cost effective option for those looking to keep project costs down. It is available in most common panel lengths, however has limited installation and accessory options. Baseboarders Basic provides a clean, minimalistic aesthetic at an increased value. Use multiple panels for longer lengths with a Coupler between. Panels can be cut for shorter lengths with tin snips.
Look For These Baseboarders Basic Accessories
Basic Left Endcap (EC004-LF-WHT)Basic Right Endcap (EC004-RT-WHT)Basic Coupler (CP004-WHT)Basic Inside 90 Corner (IC004-WHT)Wall Brackets (WB001-WHT)
Note: Only Baseboarders brand Basic accessories fit Basic panels.
Retrofitting Guide to Ensure Proper Fit / Measuring for Length and Layout
STEP 1: Remove one endcap and the front panel. Measure between the floor and the top of the heater.
Objective: 7.5″ or greaterIf less than 7.5″ use the Wall Brackets (WB001) for mounting. This will bring the height up by a minimum of 1.25″.
STEP 2: Measure from the bottom of the heating element to the top of the heater.
Objective: Between 5″ and 6.75″If less than 5″ use the Wall Brackets (WB001) for mounting. If the distance is greater than 6.75″, the Premium TALL profile should be used.
STEP 3: Measure from the outside face of the finned tube heating element to the back plate.
Objective: Less than 3.25″If larger 4″ x 4″ or 4″ x 6″ commercial style element is in place, a wood molding will solve the depth issue.
STEP 4: Measure for length and layout
There is no need for fractional or perfect measurements. Each endcap can offer up to 1.75″ for a total of 3.5″ when using an endcap at both ends of the panel.Standard straight lengths are measured from end to end using the original back plate. If a straight section is missing the back plate, measure from one extreme end of desired coverage to the other extreme end of coverage. Then subtract 1″. This is the ideal panel length.Baseboard heaters longer than 6′ will require the use of multiple panels and couplers to register the ends together. Example: 8′ = Two 4′ panels and a Baseboarders Basic Coupler to connect them.If Inside Corners are required, panel lengths can be determined by: a. Removing endcaps, b. Measuring side 1 from pipe to corner, c. Subtract 3” for depth of the adjacent cover, d. Repeat with side 2.
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.6 out of 5 stars
558
4.5 out of 5 stars
242
4.7 out of 5 stars
73
Price
$112.90$112.90 $147.10$147.10 $173.30$173.30
Panel Lengths
3′ 4′ 5′ & 6′ 2′ 3′ 4′ 5′ 6′ & 7′ 2′ 3′ 4′ 5′ 6′ & 7′
Primary Accessories
Closed Endcaps, Inside Corners & Couplers Closed Endcaps, Inside Corners & Couplers Closed Endcaps, Inside Corners & Couplers
Additional Accessories
None Open Endcaps, Zero Clearance Endcaps, Inside Corners and Outside Corners Open Endcaps & Zero Clearance Endcaps
Specialty Product
✓
Anti Rust Protection
No
✓
✓
🏠 BASIC SERIES: The basic series is for those who love simple and effective solutions to DIY-ing your home. The Basic series comes with a 2-year protection guarantee against rust and normal use. Baseboarders is designed for hydronic baseboard heaters, but can be used with electric baseboard heaters as well. Be careful whenever using with electric baseboard heaters as electric units generate higher surface temperatures.
🏠 ADD ATTACHMENTS: Easily add Baseboard Brand covers or additional accessories to your accessory purchase to complete your look. Covers come in 3 ft – 7ft sizes
🏠 EASY DIY INSTALLATION: Easily snap on the new cover over your existing heater for a quick and easy installation. No need to hire expensive plumbers or handymen to install something you can do yourself! (special tools may be required if you want to cut an exact length – ie. 67″ instead of the traditional 72″)
🏠 GALVANIZED STEEL: Our 24 gauge galvanized steel covers are durable, but lightweight. Don’t mess with ugly plastic fittings or replacements, the galvanized steel will standout against the competition and your old heaters. (accessories are 22-gauge galvanized steel)
Price: $3.80