Price: $33.69 - $27.99
Specifications
– Item Size – 34.25inches x 15inches
– Item Weight – 1.78pounds
– Clamps – Heavy Duty Clamps
– Material – 0.7mm Thickened Aluminum
– Applicable Heater Type – Full-Size Round Patio Heaters
Function
– Highly Reflective Surface
– Foldable, Easy to Storage
– High-temperature Resistance
– Easy to Install, No tools needed
– Save Energy, Use less Propane, Environmental Friendly
– Directional Heat Conduction, Extended Heat Range and Increased Performance
Warm Tips
1. The reflector must be assembled on the opposite side of the control knob, otherwise it will cause the knob to melt.
2. Please remove the blue protective film of 3 Reflector Panels before assembly.
3. Pay attention to the corners or edges of panels while installing to avoid scratches.
4. Check the Screws to make sure they are still tightly fastened to the heater top.
Installation Steps
STEP 1 – Connect the left panel (A), middle panel (C), and right panel (B) withM6 screws (G) and M6 Cap nuts (H)
STEP 2 – Connect the Bracket (D) to the panels with M6 screws (I)
STEP 3 – Connect the deflector to the heater reflector with Fix screws (E), and put the protective cover on the fix screws. Then fix the deflector on the heater.
๐๐ป๐ฒ๐ฟ๐ด๐ ๐ฆ๐ฎ๐๐ถ๐ป๐ด ๐ฎ๐ป๐ฑ ๐๐ฑ๐ท๐๐๐๐ฎ๐ฏ๐น๐ฒ ๐ฅ๐ฎ๐ป๐ด๐ฒ – This patio heater reflector shield is the perfect accessory for the heater. With adjustable range function, it effectively expands the heating range and blocks heat from walls, trees, or anywhere that doesn’t need it. Make your propane last longer.
๐ง๐ต๐ถ๐ฐ๐ธ๐ฒ๐ป๐ฒ๐ฑ ๐๐น๐๐บ๐ถ๐๐บ ๐ ๐ฎ๐๐ฒ๐ฟ๐ถ๐ฎ๐น – Most reflector shield on the markets utilize 0.6mm aluminum. EAST OAK’s outdoor heater reflector shield is made of 0.7mm thickened premium aluminum material, making it resistant to breaking, anti-rust, and bringing long-term durability. In addtition, the heat-focusing reflector is hammered with powder coating thermal focusing to provide better heat distribution.
๐๐ฎ๐๐ ๐๐ผ ๐๐ป๐๐๐ฎ๐น๐น – Please be careful with the edge during installation to avoid scratches. STEP 1: Connect the left panel (A), middle panel (C), and right panel (B) withM6 screws (G) and M6 Cap nuts (H). STEP 2: Connect the Bracket (D) to the panels with M6 screws (I). STEP 3: Connect the deflector to the heater reflector with Fix screws (E), and put the protective cover on the fix screws. Then fix the deflector on the heater.
๐๐ผ๐บ๐ฝ๐ฎ๐๐ถ๐ฏ๐น๐ฒ ๐ฃ๐ฎ๐๐ถ๐ผ ๐๐ฒ๐ฎ๐๐ฒ๐ฟ๐ – Suitable for umbrella-shape patio heaters such as the EAST OAK EO-PH001. Not suitable for pyramid patio heaters and mini patio heaters.
๐๐ฎ๐๐ ๐๐ผ ๐๐ฎ๐ฟ๐ฟ๐ ๐ฎ๐ป๐ฑ ๐ฆ๐๐ผ๐ฟ๐ฒ – Made of three panels, this patio heater focusing reflector is easy to carry and store.
๐๐๐๐ง ๐ก๐ข๐ง๐๐๐ – THE REFLECTOR MUST BE ASSEMBLED ON THE OPPOSITE SIDE OF THE CONTROL KNOB, OTHERWISE IT WILL CAUSE THE KNOB TO MELT.
๐ฏ-๐ฌ๐ฒ๐ฎ๐ฟ ๐๐๐๐๐ผ๐บ๐ฒ๐ฟ ๐ฆ๐๐ฝ๐ฝ๐ผ๐ฟ๐ – Please check the manual for customer service email to contact us if you have any questions or problems. We provide a 3-year Warranty against manufacture defects and lifetime customer support.
Price: $33.69 - $27.99
